Vacon DPD00109 Instalační manuál stáhnout pdf (Strana 8)

8  vacon Keypad Remote Control Options

24-hour support 1-877-822-6606

Step 4. Re-assembling the AC Drive (XRKPM only)

1. Plug the Keypad Interface Module (KIM) fabricated in Step 3 into the inverter, as it was originally (see Step 2,

#4).

2. Fasten the KIM with the two (2) M4 x 10 screws removed in Step 2, limiting torque to 12 in-lb. maximum.

3. Make sure that all cabling is routed so that it is not pinched in the assembly. The ribbon cable should be

routed through the opening in the cover and should exit downward.

4. If or when you re-install the cover, route the ribbon cable through the opening and limit the installation torque

on the cover screws to 26 in-lb. maximum.

Figure 4: Re-assembling the AC Drive (XRKPM Option)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Žádné komentáře

Vacon DPD00109 Instalační manuál Strana 8